Transmission Part - TRIUMPH STAGS 2000/2500

I have lots of modifications that you can carry out on your Stag to improve the reliability of your transmission. For example a reconditioned differential with a brand new 3.45 ratio CW&P, new bearings and reinforced nose (they break!), together with my brand new GKN drive shafts (which also improve the handling). By the way these shafts also eliminate the infamous 'Stag Twitch' as well. PLEASE do yourself a favour and DON'T waste your money on so-called 'reconditioned' drive shafts. The splines you will get will be 25 years old and, with no means of greasing them, the splines will have 25 years of wear from being used for all that time with no lubrication! They will be worn to hell and gone. ALL you get is new U/J's which in themselves are fine but with the worn splines are a complete waste of money.

NB. a disclaimer must be signed and sent to me for all safety-crucial parts before goods can be despatched

Products Available

4-SPEED AUTO ZF HP22 CONVERSION KIT

4-Speed Auto ZF HP22 Conversion Kit. Includes everything you need for the conversion. Please contact us for delivery charge or you can collect the kit yourself. Alternatively my supplier will fit the kit for you (requires the car for 2 days) for a very reasonable charge of £385 PAYMENT IS BANK TRANSFER ONLY ON THIS ITEM

£3100.00 Kit
4-SPEED AUTO ZF HP22 CONVERSION KIT

RECON REAR HUBS

new bearings and seals. Run-in on lathe for 20 mins before end-float set. Read more...

£434.00 Pair
Recon Rear Hubs - pair (inc. exch s/c of £130)
£845.00 Pair
Recon Rear Hubs prefitted with new GKN driveshafts - pair(inc. exch s/c of £130) Pre-Fitted GKN Driveshafts. (includes fitting service charge of... £42/pair)

Brand New Rear Hubs

Brand New Rear Hubs - better than originals! Much stronger flanges with thickness increased to 13mm. Made from turned billet on automatic C.N.C. machine. Fitted with new shaft, all new bearings and seals. Everything new. As with my recon hubs, run-in on lathe for 20 minutes before end-float is set. Comes ready to bolt on.

£720.00 Pair
Brand New Rear Hubs

RECON STAG DIFFERENTIALS

New C/W & pinion, bearings and seals. Ratios: 3.7 & 3.45 (7% lower revs). Please select ratio required. Clean parts only in exch please. 1 YEAR GUARANTEE . IMPORTANT WE ARECURRENTLY NOT SUPPLYING THIS PART DUE TO THE POOR QUALITY CWP AVAILABLE CAUSING THEM THE WHINE PERMANENTLY . i

£0.00 Each
Recon Differential - Ratio 3.7
£0.00 Each
Recon Differential - Ratio 3.45
£0.00 Each
Reinforced Nose and New Bearing for Recon Diff

DIFF CONVERSION KIT

Modified STAG subframe ready to bolt up to car, c/w instructions. Differential ratios available. RATIOS: (Figs in brackets = % drop in revs) 2.65(40), 2.93(26), 3.07(20), 3.25(14), 3.46(7), 3.71(nil). We will advise which type of diff to purchase when ordering. Price includes new uprated propshaft. nb. signed disclaimer required for this item Your 3 exch parts, ie. 2 subframe arms and diff backplate, MUST be clean and sound or surcharge to be retained. A £175 surcharge will apply IF SUBFRAME & DIFF BACKPLATE ARMS ARE NOT SUPPLIED BEFORE WE DESPATCHRead more...

£1150.00 Each
BMW Diff Conversion Kit

BMW Suspension/Transmission Transplant Kit

Complete BMW 3-Series Rear-End Transplant. Utilises a modified 3-series cross-member and bolts straight up to the Stag bodyshell. Price includes new GKN propshaft and new rear springs. Will require new wheels to compensate for wider track. nb. signed disclaimer required for this item. Diff rear mounting plate required in exchange (Rimmers part no. 311268).Read more...

£1700.00 Kit
BMW Suspension/Transmission Transplant Kit

Datsun Driveshafts/Exchange Hubs

Ball bearings replace splines. You get new U/J bearings, hub bearings & seals. Bench run-in for 20 mins prior to setting end-float Only clean parts accepted in exchange... important Please don't post to me but to the machine shop address you will be given after receipt of your order. Exchange surcharge £130.

£0.00 Pair
Datsun Driveshafts/Exchange Hubs
 Driveshafts

Driveshafts

Specially made for Monarch with RILSAN epoxy coated splines for low friction and long life. Spline grease nipples provided. No exchange as these are brand new. If you are also ordering my Recon Rear Hubs these shafts can be supplied ready assembled for you.

£382.00 Pair
Driveshafts

Standard Universal Joints

(U/J cross with 4 bearing caps)

£50.00 Pair
Standard Universal Joints

Brand New Propshafts

£220.00 Each
Heavy Duty U/J's
£300.00 Each
3.5 inch diameter for high power engines

Propshafts - Longer

£220.00 Each
Rover Propshaft, std dia. Heavy Duty UJs
£320.00 Each
Rover Propshaft, 3.5 inch dia. for 200bhp + up and when fitting my BMW diff conversion (I guarantee no vibration at 150mph)

Heavy duty universal joints

Heavy duty universal joints

£75.00 Pair
Heavy duty universal joints