Suspension Parts - TRIUMPH STAGS 2000/2500

The Stag was on the drawing board in the 1960's, over 40 years ago! It has been said by some purists that it was, and still is, perfect. Some of us would disagree. Sorry, but anyone who tries to tell me that we have learnt nothing in the last 40 years is a fool. Since then cars have progressed at a phenomenal rate to become marvels of modern engineering, faster, safer and more luxurious than they could have dreamed of back then. We can apply some of this knowledge and improvement to our Stags. My aim is to enhance the enjoyment you get from driving your Stag and to bring its performance and handling into the 21st century to compete with the best modern cars on the road today. The Monarch Stag is now such a car. For more info on the Stag suspension read my article and the following articles for details of the infamous 'Stag-twitch' problem and ways to improve handling.

NB. a disclaimer must be signed and sent to me for all safety-crucial parts before goods can be despatched

Products Available

Aluminium Hub with Larger Stub Axle Spindle

ALUMINIUM HUBS

Weighing only 1.3kg which is half the weight of standard steel hubs. Supplied with larger spindles in En24T steel and large outer bearing, complete and assembled with new bearings and oilseals. Ready to Fit. nb. signed disclaimer required for this item

£453.00 Pair
ALUMINIUM HUBS
£39.00 Each
OPTIONAL EXTRA: Wheel studs ready pressed Above hubs supplied with wheel studs ready pressed in ... extra

BEARINGS/SEALS KIT

BEARINGS/SEALS KIT for above (includes larger outer bearings).

£65.00 Each
BEARINGS/SEALS KIT
Monarch Aluminium Brake Kit showing Adjustable Height Struts

McPHERSON STRUTS

Mcpheson struts with adjustable height aluminium lower spring platforms. Come with C-spanners but not dampers. Designed to take my prog-rate springs.

£204.00 Pair
McPHERSON STRUTS

ADJUSTABLE DRAG STRUTS (reinforced) INC £50 EX SURCHARGE

ADJUSTABLE DRAG STRUTS (reinforced) Set caster in situ nb. signed disclaimer required for this item

£190.00 Pair
ADJUSTABLE DRAG STRUTS (reinforced) INC £50 EX SURCHARGE

ROLLER BEARING McPHERSON STRUT TOP MOUNTS

ROLLER BEARING McPHERSON STRUT TOP MOUNTS Kit includes 2 Timken roller bearings, stainless steel lower weather/dust sealing washer, external 'O' Ring & a precision distance piece which fits between the bearings providing the correct pre-load. important Please don't post exchange mounts to me but to the machine shop address you will be given after receipt of your order

£125.00 Each
ROLLER BEARING McPHERSON STRUT TOP MOUNTS

SPAX GAS ADJUSTABLE REAR SHOCKS

£188.00 Pair
SPAX GAS ADJUSTABLE REAR SHOCKS

CLASSIC PRE-SETTABLE REAR SHOCKS

£220.00 Pair
CLASSIC PRE-SETTABLE REAR SHOCKS

CLASSIC PRE-SETTABLE FRONT SHOCK INSERTS

£251.00 Pair
CLASSIC PRE-SETTABLE FRONT SHOCK INSERTS

SPAX GAS ADJUSTABLE FRONT SHOCK INSERTS

£253.00 Pair
SPAX GAS ADJUSTABLE FRONT SHOCK INSERTS

GAZ TOP ADJUSTABLE FRONT SHOCK ABSORBERS

£274.00 Pair
GAZ TOP ADJUSTABLE FRONT SHOCK ABSORBERS

ADJUSTABLE REAR SHOCK ABSORBERS GAZ

£165.00 Pair
ADJUSTABLE REAR SHOCK ABSORBERS GAZ

PROGRESSIVE-RATE SPRINGS

PROGRESSIVE-RATE SPRINGS standard rate for first 1" of wheel travel then stiffen with compression giving anti-roll properties. Standard height or lowered as required, please select height required. NB. Standard Height is 141/2" measured from the centre axis of the wheel to the underside of the top of the wheel arch (ie. at 12 o' clock). This is for both front and back wheels. I recommend that the front is 1/2" lower than the back. A slight forward rake looks right. Level is OK, but the back must not be lower than the front. If you want new progressive-rate front springs only, ie. retaining your old rears, then let me have the height at the back, measured as described above and I will supply you with the correct length prog-rate fronts.

£98.00 Pair
Standard Height - Front
£98.00 Pair
Lowered 1/2" - Front
£98.00 Pair
Lowered 1" - Front
£98.00 Pair
Lowered 1 1/2" - Front
£112.00 Pair
Standard Height - Rear
£112.00 Pair
Lowered 1/2" - Rear
£112.00 Pair
Lowered 1" - Rear
£112.00 Pair
Lowered 1 1/2" - Rear
Monarch Adjustable Track Control Arms

ADJUSTABLE TRACK-CONTROL ARMS (includes ex surcharge)

ADJUSTABLE FRONT TCA for precise setting of camber angle.INCLUDES Exchange surcharge £50

£175.00 Pair
ADJUSTABLE TRACK-CONTROL ARMS (includes ex surcharge)

ADJUSTABLE REAR TRAILING-ARM BRACKETS

ADJUSTABLE REAR TRAILING-ARM BRACKETS to reset rear camber angle when lowering car. Infinite adjustment.Read more...

£98.00 Pair
ADJUSTABLE REAR TRAILING-ARM BRACKETS

REAR TRACK-CONTROL KIT

Rose-jointed link-rods tie the back of the trailing-arms to the differential, controlling unwanted sideways movement (the main cause, along with worn half-shafts, of the famous STAG twitch. This kit will improve handling. Rubber dust protection boots now included in kit as standard for the outer rose-joints. Read more...

£185.00 Pair
REAR TRACK-CONTROL KIT
£10.00 Set of 2
Extra Rubber Dust-Protection Boots Available for the inner rose joints (2 needed)
Monarch Uprated Front Anti-Roll Bars
£265.00 Each
Uprated Front Anti-Roll Bars - 1 inch dia.

£

REAR SPRING SPACERS

REAR SPRING SPACERS to adjust car height in 1/2" increments

£25.00 Each
REAR SPRING SPACERS

REAR SPRING SPACERS

REAR SPRING SPACERS 5mm thicker raising car 10mm

£10.00 Each
REAR SPRING SPACERS

ADVANCED POLYURETHANE SUSPENSION BUSHES

Easiest to fit, improved location, tough, durable, non perishing, oil resistant, self lubricating. S/steel sleeves Read more...

£18.15 Each
Front Track Control Arm Cotton Reel Section Bush & Stainless Steel Tube Superflex Part No SPF0137 replaces O.E. No 138885
£18.15 Each
Track Control Arm Bush Extra Firm, Very Fast Road/Race NB. use where extreme tyre grip is available Super Flex No SPF0137-90 Replaces O.E. No 138885
£7.35 Each
Front Tie Bar/Drag Strut 'D' Bush 80 Shore Fast Road Superflex Part No SPF0084 replaces O.E. No 138143
£7.35 Each
Front Tie Bar/Drag Strut 'D' Bush; Low NVH 70 Shore for Light Road Use (Black) Superflex Part No SPF0084-70 replaces O.E. No 138143
£29.40 Kit of 4
Tie Bar Caster Increase Bush Kit of 4, improves turn in Superflex Part No SPF0084CKF replaces O.E. No 138143
£8.40 Each
Steering Rack Mount Cotton Reel Section Bush & Stainless Steel Tube Superflex Part No SPF0476-80 replaces O.E. No 119450
£12.30 Kit of 2
Steering Rack Ball Cup & Backing Washer (red), Kit of 2 Superflex Part No SPF1171K replaces O.E. No 158732
£15.29 Kit of 2
Front Anti-roll Bar to Chassis Bush Superflex Part No SPF0754/20 replaces O.E. No 123998
£2.55 Each
Front Anti-roll Bar Drop Link Bush Superflex Part No SPF0806 replaces O.E. No 517985
£10.80 Each
Front Spring Upper Insulator Superflex Part No SPF1183 replaces O.E. No 139160
£16.35 Each
Front Spring Lower Insulator Superflex Part No SPF1184 replaces O.E. No 157136
£5.25 Each
Sun Visor Mount, Black Superflex Part No SPF0273 replaces O.E. No 624201
£3.30 Each
Bonnet Stop, Black Superflex Part No SPF0338 replaces O.E. No 619551
£9.30 Each
Diff Cone Mount Bush Upper, Solid, Fast Road Superflex Part No SPF0138 replaces O.E. No 134235
£9.30 Each
Diff Cone Mount Bush, Voided to Reduce Transmission NVH Superflex Part No SPF0138V replaces O.E. No 134235
£9.00 Each
Diff Cup Mount Bush Lower, Solid, Fast Road Superflex Part No SPF0138A replaces O.E. No 134236
£9.00 Each
Diff Cup Mount Bush, Voided to Reduce Transmission NVH Superflex Part No SPF0138AV replaces O.E. No 134236
£39.00 kit of 8
Rear Shock Absorber Bush Superflex Part No SPF0809-70 replaces O.E. No SPF0809-70
£7.50 Each
Rear Spring Insulator, Standard Thickness Superflex Part No SPF0851 replaces O.E. No 138823
£10.20 Each
Rear Spring Insulator, 5mm Thicke One per spring (top or bottom) will raise car 10mm. Two per spring (top or bottom) will raise car 20mm. Superflex Part No SPF0851+5 replaces O.E. No 138823
£22.50 Kit of 8
Gear Box Cross Member Bush, Kit of 8 Superflex Part No SPF0287K replaces O.E. No 137972/3
£2.70 Each
Tube Spacer, Stainless Steel, fits within above bush Superflex Part No SPF0287T replaces O.E. No 138507
£0.75 Each
Washer, Stainless Steel for Gearbox Cross Member Bush Superflex Part No SPF0287W replaces O.E. No WP136
£63.60 kit of 8
Exhaust Subframe Mounting Bush, Pair and Stainless Steel Tube Superflex Part No SPF1389 replaces O.E. No GEX7329/7330
£13.20 Each
BMW Trailing Arm Bush & Stainless Steel Tube where 3 Series Rear End is fitted to Stag
£63.90 Each
Trailing arm bush rear

POWERSTEERING RACKS

Reconditioned & guaranteed 1 Year (parts only) . Excludes Exchange Surcharge. CLEAN racks only accepted

£208.00 Each
POWERSTEERING RACKS

POWERSTEERING PUMP

POWERSTEERING PUMP with lower pressure o/p for more feel.

£215.00 Each
POWERSTEERING PUMP
Kit fitted to a Stag with one of my 4 barrel Holley carbs

ADJUSTABLE FRONT STRUT BRACE KIT

For improved road holding and reduced tyre wear. Fully screw-adjustable couplings allows for variation in individual cars and correct pre-load to be set. c/w complete fitting instructions. Please select which engine set-up you have and which colour kit you require. The kit is also available just in primer for you to spray in whichever other body-colour you need or left bare metal for you to have plated.Read more...

£130.00 Each
Standard Stag - Silver
£130.00 Each
Standard Stag - Black Satin
£130.00 Each
Standard Stag - Black Gloss
£130.00 Each
Standard Stag - Primer
£130.00 Each
Standard Stag - Bare Metal
£130.00 Each
Stag with Holley - Black Gloss
£130.00 Each
Stag with Holley - Black Satin
£130.00 Each
Stag with Holley - Silver
£130.00 Each
Stag with Holley - Primer
£130.00 Each
Stag with Holley
£130.00 Each
Stag with Holley - Bare Metal
£130.00 Each
Rover with Holley - Silver
£130.00 Each
Rover with Holley - Black Satin
£130.00 Each
Rover with Holley - Black Gloss
£130.00 Each
Rover with Holley - Primer
£130.00 Each
Rover with Holley - Bare Metal
£75.00 Each
Non-adjustable Front Strut Brace Kit Non-adjustable strut brace kit for Stag engine with standard Stromberg carbs, sprayed silver

SUSPENSION/TRANSMISSION TRANSPLANT KIT

Complete BMW 3-Series Rear-End Transplant. Utilises a modified 3-series cross-member and bolts straight up to the Stag bodyshell. Price includes new GKN propshaft and new rear springs. Will require new wheels to compensate for wider track. NB. signed disclaimer required for this item Diff rear mounting plate required in exchange (Rimmers part no. 311268). Exchange Surcharge £60Read more...

£1700.00 Kit
SUSPENSION/TRANSMISSION TRANSPLANT KIT