ROVER V8 - ENGINE FITTING PARTS - ROVER INTO STAG

IMPROVE THE APPEAL AND VALUE OF YOUR STAG BY UPGRADING THE PERFORMANCE

There are several good reasons to fit a Rover engine to a Stag:

  • Size and shape. It is the same physical size as the Stag engine and fits perfectly in the engine bay which was designed for an almost identical engine.
  • Weight. Weight corrupts power and balance. The Rover engine is 100lbs lighter which has benefits all round, ie. performance (less dead weight to accelerate and brake) and handling. (See my article on modified Stags)
  • Reliability. You can have a lot more power if you want it and reliability.
  • Performance. The Rover V8 can be tuned to give huge increases in power reliably. A standard 3500 can be modified to give 200bhp quite cheaply and the Range Rover EFI (Electronic Fuel Injection) engines 300bhp, or even a good deal more depending on how much you are prepared to spend.

I can supply everything you need to do the conversion to a Rover 3.5, 3.9, 4.2 or even the 4.6 EFI (which is the engine used by TVR!), as well as offer free advice, find a suitable good 2nd hand engine, even put you in touch with the right people (if needed) to do the rebuild including all the electronics. So why not give it a whirl? Read more about Rover engine conversions in my article.

NB. a disclaimer must be signed and sent to me for all safety-crucial parts before goods can be despatched

Products Available

HIGH PERFORMANCE OPTRONIC IGNITION KIT

Suited to sports performance engines such as the Rover, this kit gives you all the benefits of the Optronic system but in addition comes with Lumenition's own "Constant Energy High Performance" low-resistance, high quality sports coil, electronically matched to the Power Module. This coil has only 0.9 Ohms resistance compared to 2.5 Ohms on your standard coil. The microcircuit control of the coil current gives optimum performance over speed and voltage range ensuring constant maximum spark energy at the coil. Variable dwell angle, optimising energy use to prevent low-speed coil overheat. Automatic switch-off, preventing electrical damage in the event of the ignition being left on. (includes fitting kit Fk114 and mounting bracket MK006)

£318.00 Each
HIGH PERFORMANCE OPTRONIC IGNITION KIT
Lumenition

Lumenition Classic Ignition Kit - Rover

CLASSIC OPTRONIC SOLID STATE IGNITION KIT. Lumenition Classic Ignition Kit - Rover. Optical switching (includes fitting kit Fk114)

£216.00 Kit
Lumenition Classic Ignition Kit - Rover

Lumenition Classic Ignition Kit plus Bracket - Rover

CLASSIC OPTRONIC SOLID STATE IGNITION KIT. As above with additional Classic Mounting Bracket MK006.

£228.00 Kit
Lumenition Classic Ignition Kit plus Bracket - Rover

Holley 4-Barrel Carb - Rover

4-BARREL CARB - Uses 2 for normal running & 4 for full power (2nd two vacuum operated). Jetted for Rover. Bolt on and go. 10 BHP more and 26 mpg. Better response and driveability. See feature on Stag Engine page for more details.

£499.00 Each
Holley 4-Barrel Carb - Rover

Offenhauser 360 degree Holley Inlet Manifold

Equal flow to cylinders.

£300.00 Each
Offenhauser 360 degree Holley Inlet Manifold
£30.00 Each
THERMOSTAT HOUSING / TOP HOSE OUTLET (cast iron)

Lo-Rider Air Cleaner for Holley - Rover

(No bonnet bulge)

£75.00 Each
Lo-Rider Air Cleaner - Rover
£30.00 Each
Lo-Rider Replacement Air Filter - Rover
Automatic, incorporates auto-kickdown facility

Throttle Cable and Bracket (adjustable length) plus mounting bracket

Monarch Throttle Cable Brackets mounted on Holley. C/w socket attached to cable & ball for carb throttle lever. Full slack adjustment facility.

£75.00 Each
Manual
£95.00 Each
Automatic

Monarch Exhaust Manifolds - Rover

£745.00 Pair
Monarch Exhaust Manifolds - Rover

Gasket Set - Rover

£22.48 Each
Gasket Set - Rover

Link Pipes - Rover

LINK PIPES to connect manifold front bends to Stag sliencers

£60.00 Each
Link Pipes - Rover
Rover Engine Mounts - showing engine plates, rubber mounts and chassis interface brackets

ROVER ENGINE MOUNTINGS

£45.00 Pair
Chassis Interface Brackets - Rover
£49.00 Pair
Engine Mounting Rubbers - Rover
£58.00 Pair
Engine Plates - Rover

Chassis Cross-Member Lowering Spacers - Rover

CHASSIS CROSS-MEMBER LOWERING SPACERS in 5/8" aluminium incl. 12.9 hi-tensile bolts

£60.00 Pair
Chassis Cross-Member Lowering Spacers - Rover
Rover SD1 sump plus oil pick-up, suitable for Stag

Rover SD1 Sump

Rover SD1 sump plus oil pick-up, suitable for Stag. (2nd hand. Later sumps wrong shape)

£125.00 Each
Rover SD1 Sump
Rover SD1 sump plus oil pick-up, suitable for Stag

Sump Oil Pick-Up Assembly

£45.00 Each
Sump Oil Pick-Up Assembly

Rover 5-Speed Gearbox Mounting Bracket

Strong X-member bracket

£90.00 Each
Rover 5-Speed Gearbox Mounting Bracket
£40.00 Pair
Gearbox Rubber Mountings - Rover
£10.00 Each
Centre Rubber Stabiliser - Rover

Alternator Mounting Bracket - Rover

Cast aluminium, c/w adjuster

£135.00 Each
Alternator Mounting Bracket - Rover
Brackets (2) to mount Stag powersteering pump to Rover V8 engines

Power Steering Pump Mounting Brackets

Brackets (2) to mount Stag powersteering pump to Rover V8 engines

£57.50 Pr
Power Steering Pump Mounting Brackets
Powersteering pump hoses

Power Steering Pump Hoses

Longer than Stag originals

£166.00 Pair
Power Steering Pump Hoses - Rover
£115.00 Each
Single Hi-Pressure Hose - Rover
£59.00 Each
Return Hose - Rover

Crankshaft Pulley, Snub Nose - Rover

used crank pulley including extra power st pump pulley

£129.00 Each
Crankshaft Pulley, Snub Nose - Rover
alloy pulley short pump

Waterpump, Snub Nose - Rover

£139.00 Each
short water pump short nose water pump
£85.95 Each
alloy pulley alloy pulley for short nose water pump

Clutch Hose - Rover

Stag m-cyl to Rover slave. Aeroquip stainless steel braided nylon hose with swivels

£60.00 Each
Clutch Hose - Rover

Bosch Universal Hi-Pressure Roller Vane EFI Pump

£145.00 Each
Bosch Universal Hi-Pressure Roller Vane EFI Pump - Rover
£25.00 Each
EFI Pump Mounting Bracket - Rover
Pre Hi-Pressure EFI Roller-Vane Petrol Pump Filter

Pre Hi-Pressure EFI Roller-Vane Petrol Pump Filter

Big capacity with banjo and unions for Stag

£49.00 Each
Pre Hi-Pressure EFI Roller-Vane Petrol Pump Filter - Rover
£85.00 Each
Smaller pre-injector filter Body 95mm X 55mm - not incl. tails. This filter has been specifically designed for use between the Hi-pressure petrol pump and the injectors. The unit has been over-specified in quality to meet the requirements of the British Touring Car Series. Each unit has been assembled by hand.

Steering Shaft Flexible Rubber Coupling

No vibration feedback.

£90.00 Each
Steering Shaft Flexible Rubber Coupling

Machining Plenum Base

(EFI engines) to lower overall height.

£90.00 Each
Machining Plenum Base
Rover Gear Selector, shortened to suit Triumph Stag

Rover Gear Selector

There will be an £85 surcharge refundable on exchange unit where available

£205.00 Each
Rover Gear Selector

Modified Gearlever - Rover

Modified to centralise in aperture.An exchange surcharge of £40 refundable on exchange when available

£50.00 Each
Modified Gearlever - Rover

Reverse Light Switch

£35.00 Each
Reverse Light Switch
 Leather gearknob suitable for Rover boxes

Gearknob - Rover

£18.00 Each
Gearknob - Rover

Rover Bellhousing

£350.00 Each
Rover Bellhousing

Clutch Lever Fork

c/w slave rod

£25.00 Each
Clutch Lever Fork

Pivot Post

£15.00 Each
Pivot Post

Slipper Pads

£5.00 Pair
Slipper Pads

NEW RELEASE BEARING

£45.00 Each
NEW RELEASE BEARING

Rover Flywheel

2nd Hand in good condition

£90.00 Each
Rover Flywheel

Propshafts - Longer

For Rover 5-speed boxes

£220.00 Each
Propshaft Shaft - Std U/J's
£240.00 Each
Propshaft Shaft - Heavy Duty U/J's
£310.00 Each
Rover Propshaft, 3.5 inch diameter For 200bhp + up and when fitting my BMW diff conversion (I guarantee no vibration at 150mph)

RADIATORS - UPRATED

Special triple-flow with hi-efficiency core. Two types available: 1) Fractionally smaller outside dimensions to allow mounting in front of rad panel without the need for any body mods or to Rover front pulleys. Ideal for Rover 3500 engines

£0.00 0
RADIATORS - UPRATED

RADIATORS - UPRATED

2) Larger rad for higher powered Rover engines. This rad is also mounted in front of rad panel allowing space for standard Rover pulleys:

£489.00 Each
Rover Radiator - Special, with 3 row Q core. 4 core radgiving same properties as outlined in Q rad above but for engines producing over 250bhp

Radiator Top Hose Filler/Self Air Bleeder

£59.00 Each
Radiator Top Hose Filler/Self Air Bleeder

16 inch Fan - Rover

16 inch Fan inc adj stat and fixings

£185.00 Each
16 inch Fan - Rover

Rover LT77 gearbox

2nd hand LT77 gearbox 5 speed bare boxRead more...

£250.00 Each
Rover LT77 gearbox