RECON REAR HUBS

new bearings and seals. Run-in on lathe for 20 mins before end-float set.

new bearings and seals. Run-in on lathe for 20 mins before end-float set.

nb. I cannot accept exchange rear hubs and drive shafts that are in any way damaged or not in re-usable condition. Also, we cannot re-use Mk1 drive shafts which do not have a circlip retaining the U/J bearings. If your hubs/shafts are not in good condition the exchange surcharge will have to be retained. To save yourself wasting money on postage please inspect your ex units carefully before posting. Important Do not send to me. If you do I will have to re-post them to the factory and will have to take the cost out of your surcharge refund. They must be posted direct to the factory address that you will be given after ordering. Once they have been checked for usability you will be sent your refund.

 

Products Available

£434.00 Pair
Recon Rear Hubs - pair (inc. exch s/c of £130)
£845.00 Pair
Recon Rear Hubs prefitted with new GKN driveshafts - pair(inc. exch s/c of £130)
Pre-Fitted GKN Driveshafts. (includes fitting service charge of... £42/pair)