Brakes - TRIUMPH STAGS 2000/2500

This is one area along with Handling that you MUST do something about, even if you don't intend to 'up' the power. I can offer you uprated braking in the form of tried and tested, simple to fit, inexpensive kits that will improve the SAFETY and ENJOYMENT you will get from driving your Stag fast. For more detail read myarticle

TRANSFORM YOUR STAG'S BRAKES

I now have 3 uprated brake kits to offer you much more powerful brakes; two front 4-pot ventilated disc kits and one back disc brake conversion. Also my BMW servo conversion kit to maximise the potential of these kits with reduced pedal pressure (this can be nice for standard Stag brakes too by the way)

ALL MY KITS:

  • Use calipers, pads and discs from modern production cars and spares are available from any parts factor or indeed the manufacturer's agents.
  • Simply bolt on
  • Come with comprehensive fitting instructions, pads, Euroquip stainless steel braided PTFE hoses & high-tensile bolts.
  • Are available in the following finishes:
    • Standard black paint
    • Electroplated
    • Specialist flouropolymer coating as used by the aviation industry and designed to withstand the rigours of heat, brake fluids, oils and salt. Choice of colours - Black, Red, Blue, Green and Silver.
    nb. these finish options do not apply to the 4-pot aluminium calliper kit which is only available in natural finish

NO MODS ARE NECESSARY - NOTHING NEEDED IN EXCHANGE

NB. a disclaimer must be signed and sent to me for all safety-crucial parts before goods can be despatched

Products Available

FRONT BRAKE / 4-POT CALIPER / VENTILATED DISC KIT

Standard Front Brake 4-Pot Caliper Ventilated Disc Kit. Comes with: new discs, factory remanufactured calipers, laser-cut brackets, pads, high-tensile bolts, EUROQUIP s/steel hoses, fitting instructions etc. More power and no fade. No increase in unsprung weight. Standard black paint finish.
Flouropolymer Coating for Standard Front Brake Kit.
As used by the aviation industry and designed to withstand the rigours of heat, brake fluids, oils and salt.
Electroplated Finish Available. Read more...

£15.00 Kit
Electroplated Finish for Standard Front Brake Kit
£0.00 kit/pair
4 pot caliper & ventilated disc conv. Please contact office

ALUMINIUM / 4-POT CALIPER / VENTILATED DISC KIT

Standard Front Brake 4-Pot Caliper Ventilated Disc Kit. Comes with: new discs, factory remanufactured calipers, laser-cut brackets, pads, high-tensile bolts, EUROQUIP s/steel hoses, fitting instructions etc. More power and no fade. No increase in unsprung weight. Standard black paint finish.
Flouropolymer Coating for Standard Front Brake Kit.
As used by the aviation industry and designed to withstand the rigours of heat, brake fluids, oils and salt. Read more...

£650.00 Kit/pair
ALUMINIUM / 4-POT CALIPER / VENTILATED DISC KIT
BMW Brake Servo Conversion Kit

SERVO CONVERSION KIT

30% lighter pedal. Price is for new m/cyl, good 2nd hand servo and brake fluid reservoir. Reinforcing plate/template for drilling new holes, additional bracket for manual cars & non return valve. PLEASE NOTE THIS CONVERSION REQUIRES A DIMPLE IN THE INNER WING & REDRILLING OF MOUNTING HOLES

£225.00 Kit
Automatic
£250.00 Kit
Manual

Greenstuff Low Dust Kevlar Pads

LOW DUST, HIGH-PERFORMANCE KEVLAR PADS.

£60.00 Each
Greenstuff Low Dust Kevlar Pads
 Monarch Rear Disc Brake Conversion Kit

REAR DISC BRAKE CONVERSION KIT

Complete with new calipers, discs, pads, laser-cut mounting plates, high-tensile bolts, Goodridge s/steel braided P.T.F.E. hoses, H/brake cable & fitting instructions. Electroplated Finish and Flouropolymer Coating available.

£515.00 Each
Rear Disc Brake Conversion Kit
£15.00 Per Kit
Electroplated Finish

Brake Pressure Proportioning Valve

To set front/rear balance. Comes with American npt fittings

£75.00 Each
Brake Pressure Proportioning Valve
£9.00 Each
Adaptors to fit in 3/16" copper rear break pipe - extra.

Replacement Brake Discs

£90.00 Pair
Front
£90.00 Pair
Rear

Front Brake Pad Fitting Kit

£5.00 Kit
Front Brake Pad Fitting Kit